ROKION BATTERY POWERED EQUIPMENT
All Rokion equipment is built from the ground up, not as conversion vehicles. Compared to its gas-powered counterparts, Rokion equipment produces zero operating emissions, emits very little heat, and generates hardly any noise from its electric motors while in use.
Rokion offers the environmental and economic advantages of battery electric equipment without compromising power or productivity.
ROKION R700
The R700 Series is a modular, multi-platform machine built to meet any number of underground needs. Designed primarily as a forklift, the versatile R700 is available in a wide array of configurations, including a front-end loader, backhoe, tire manipulator, and aerial work platform. The operator compartment is outfitted with a 180-degree rotating seat to allow the operator to control independent front- and back-end components simply by turning the seat around.
The articulated R700 is outfitted with independent front and rear drive modules and dual steering cylinders for optimal performance on uneven ground. To maintain operator safety during use, Rokion shifted the articulation pivot toward the rear of the machine so that the centre of gravity remains within the track width of the R700.
| Configuration | Base |
|---|---|
| Passengers | 1 |
| Cab | Open or Enclosed |
| Drive | Full Time 4WD |
| GVWR | 8165 kg |
| GVWR | 18,000 lbs |
| Max Payload | 2722 kg |
| Max Payload | 6,000 lbs |
| Drawbar Force | 31 kN |
| Drawbar Force | 7,000 lbs |
| Tare Weight | 5444 kg |
| Tare Weight | 12,000 lbs |
| Battery Voltage | 80 VDC |
| Battery Capacity | 33 kWh |
| Peak Power | 48 kW |
| Peak Power | 64 hp |
| Max Speed | 20 km/h |
| Max Speed | 12 mph |
| Wheelbase | 233 cm |
| Wheelbase | 92" |
| Width | 157 cm |
| Width | 62" |
| Height | 218 cm |
| Height | 86" |
| Tire Diameter | 84 cm |
| Tire Diameter | 33" |
| Outside Turning Radius | 323 cm |
| Outside Turning Radius | 127" |
| Articulation Angle | 52-degrees |
| Rated capacity forks | 2,720 kg |
| Rated capacity forks | 6,000 lbs |
ROKION R710
The R710 Series takes the modular design characteristics of the R700 and incorporates them into an even more heavy-duty platform. The R710 is designed to replace fuel-driven roof bolters and forklifts, with an array of customizable front-end options available.
The R710 features an articulated design, independent front and rear drive modules, and dual steering cylinders to navigate rough underground terrain. Like Prairie Machine’s Xcel Roof Bolters, the R710 is outfitted with certified falling object protective structures (FOPS) to ensure operator safety during use.
| Configuration | Base |
|---|---|
| Passengers | 1 |
| Cab | Open |
| Drive | Full Time 4WD |
| GVWR | 10,890 kg |
| GVWR | 24,000 lbs |
| Drawbar Force | 44 kN |
| Drawbar Force | 10,000 lbs |
| Battery Voltage | 80 VDC |
| Battery Capacity | 43 kWh |
| Peak Power | 48 kW |
| Peak Power | 64 hp |
| Max Speed | 14 km/h |
| Max Speed | 8.7 mph |
| Hydraulic Tank Size | 95 L |
| Hydraulic Tank Size | 25 gal |
| Hydraulic System | 18.5 kW (Power) 49 Lpm (Flow) 207 bar (Pressure) |
| Hydraulic System | 25 hp (Power) 13 gpm (Flow) 3000 psi (Pressure) |
| Wheelbase | 254 cm |
| Wheelbase | 100" |
| Ground Clearance | 30 cm |
| Ground Clearance | 11" |
| Width | 180 cm |
| Width | 73" |
| Height | 224 cm |
| Height | 88" |
| Tire Diameter | 90 cm |
| Tire Diameter | 36" |
| Turning Radius | 4.25 m |
| Turning Radius | 14 ft |
| Articulation Angle | 52-degrees |
| Oscillation Angle | 8-degrees |
BELT STRUCTURE INSTALLATION CART
The Belt Structure Installation Cart is a combination of Prairie Machine Flexiveyor Continuous Haulage technology and Rokion Battery technology. The Belt Structure Installation Cart is remote operated to provide a safe working space for assembling belt structure while the belt is in operation.
The battery-powered Belt Structure Installation Cart straddles the floor conveyor with ample room to tram and maneuver. As the cart drives forward, it raises the conveyor’s ore side belt above a worktable and allows mine personnel to install new conveyor belt structure. As the Cart continues to tram forward, the belt naturally settles onto the newly installed structure.
| Type | With Crossover | Without Crossover |
|---|---|---|
| Height | 13'3" | 9'11" |
| Height | 4 m | 3 m |
| Width | 11'8" | 11'8" |
| Width | 3.5 m | 3.5 m |
| Length | 34' | 34' |
| Length | 10.4 m | 10.4 m |
| Wheelbase | 14'8" | 14'8" |
| Wheelbase | 4.5 m | 4.5 m |
| Tram High | 1mph (90ft/min) | 1mph (90ft/min) |
| Tram High | 1.6 km/hr | 1.6 km/hr |
| Tram Low | 0.5mph (45ft/min) | 0.5mph (45ft/min) |
| Tram Low | 0.8 km/hr | 0.8 km/hr |
| Weight | 23,400 lbs | 22,800 lbs |
| Weight | 10,614 kg | 10,345 kg |